501 lines
18 KiB
INI
501 lines
18 KiB
INI
# Mupen64Plus Configuration File
|
|
# This file is automatically read and written by the Mupen64Plus Core library
|
|
|
|
[Audio-SDL]
|
|
|
|
# Mupen64Plus SDL Audio Plugin config parameter version number
|
|
Version = 1.000000
|
|
# Frequency which is used if rom doesn't want to change it
|
|
DEFAULT_FREQUENCY = 33600
|
|
# Swaps left and right channels
|
|
SWAP_CHANNELS = False
|
|
# Size of primary buffer in output samples. This is where audio is loaded after it's extracted from n64's memory.
|
|
PRIMARY_BUFFER_SIZE = 4096
|
|
# Fullness level target for Primary audio buffer, in equivalent output samples. This value must be larger than the SECONDARY_BUFFER_SIZE. Decreasing this value will reduce audio latency but requires a faster PC to avoid choppiness. Increasing this will increase audio latency but reduce the chance of drop-outs.
|
|
PRIMARY_BUFFER_TARGET = 3072
|
|
# Size of secondary buffer in output samples. This is SDL's hardware buffer. The SDL documentation states that this should be a power of two between 512 and 8192.
|
|
SECONDARY_BUFFER_SIZE = 1024
|
|
# Audio resampling algorithm. src-sinc-best-quality, src-sinc-medium-quality, src-sinc-fastest, src-zero-order-hold, src-linear, speex-fixed-{10-0}, trivial
|
|
RESAMPLE = "trivial"
|
|
# Volume control type: 1 = SDL (only affects Mupen64Plus output) 2 = OSS mixer (adjusts master PC volume)
|
|
VOLUME_CONTROL_TYPE = 1
|
|
# Percentage change each time the volume is increased or decreased
|
|
VOLUME_ADJUST = 5
|
|
# Default volume when a game is started. Only used if VOLUME_CONTROL_TYPE is 1
|
|
VOLUME_DEFAULT = 50
|
|
# Synchronize Video/Audio
|
|
AUDIO_SYNC = True
|
|
|
|
|
|
[Core]
|
|
|
|
# Mupen64Plus Core config parameter set version number. Please don't change this version number.
|
|
Version = 1.010000
|
|
# Draw on-screen display if True, otherwise don't draw OSD
|
|
OnScreenDisplay = False
|
|
# Use Pure Interpreter if 0, Cached Interpreter if 1, or Dynamic Recompiler if 2 or more
|
|
R4300Emulator = 2
|
|
# Disable compiled jump commands in dynamic recompiler (should be set to False)
|
|
NoCompiledJump = False
|
|
# Disable 4MB expansion RAM pack. May be necessary for some games
|
|
DisableExtraMem = False
|
|
# Increment the save state slot after each save operation
|
|
AutoStateSlotIncrement = False
|
|
# Activate the R4300 debugger when ROM execution begins, if core was built with Debugger support
|
|
EnableDebugger = False
|
|
# Save state slot (0-9) to use when saving/loading the emulator state
|
|
CurrentStateSlot = 0
|
|
# Path to directory where screenshots are saved. If this is blank, the default value of ${UserDataPath}/screenshot will be used
|
|
ScreenshotPath = ""
|
|
# Path to directory where emulator save states (snapshots) are saved. If this is blank, the default value of ${UserDataPath}/save will be used
|
|
SaveStatePath = "/mnt/d/Stuff/GameState/N64"
|
|
# Path to directory where SRAM/EEPROM data (in-game saves) are stored. If this is blank, the default value of ${UserDataPath}/save will be used
|
|
SaveSRAMPath = "/mnt/d/Stuff/GameState/N64"
|
|
# Path to a directory to search when looking for shared data files
|
|
SharedDataPath = ""
|
|
# Force number of cycles per emulated instruction
|
|
CountPerOp = 0
|
|
# Randomize PI/SI Interrupt Timing
|
|
RandomizeInterrupt = True
|
|
# Duration of SI DMA (-1: use per game settings)
|
|
SiDmaDuration = -1
|
|
# Gameboy Camera Video Capture backend
|
|
GbCameraVideoCaptureBackend1 = ""
|
|
|
|
|
|
[CoreEvents]
|
|
|
|
# Mupen64Plus CoreEvents config parameter set version number. Please don't change this version number.
|
|
Version = 1.000000
|
|
# SDL keysym for stopping the emulator
|
|
Kbd Mapping Stop = 27
|
|
# SDL keysym for switching between fullscreen/windowed modes
|
|
Kbd Mapping Fullscreen = 0
|
|
# SDL keysym for saving the emulator state
|
|
Kbd Mapping Save State = 286
|
|
# SDL keysym for loading the emulator state
|
|
Kbd Mapping Load State = 288
|
|
# SDL keysym for advancing the save state slot
|
|
Kbd Mapping Increment Slot = 0
|
|
# SDL keysym for resetting the emulator
|
|
Kbd Mapping Reset = 290
|
|
# SDL keysym for slowing down the emulator
|
|
Kbd Mapping Speed Down = 291
|
|
# SDL keysym for speeding up the emulator
|
|
Kbd Mapping Speed Up = 292
|
|
# SDL keysym for taking a screenshot
|
|
Kbd Mapping Screenshot = 293
|
|
# SDL keysym for pausing the emulator
|
|
Kbd Mapping Pause = 112
|
|
# SDL keysym for muting/unmuting the sound
|
|
Kbd Mapping Mute = 109
|
|
# SDL keysym for increasing the volume
|
|
Kbd Mapping Increase Volume = 93
|
|
# SDL keysym for decreasing the volume
|
|
Kbd Mapping Decrease Volume = 91
|
|
# SDL keysym for temporarily going really fast
|
|
Kbd Mapping Fast Forward = 102
|
|
# SDL keysym for advancing by one frame when paused
|
|
Kbd Mapping Frame Advance = 47
|
|
# SDL keysym for pressing the game shark button
|
|
Kbd Mapping Gameshark = 103
|
|
# Joystick event string for stopping the emulator
|
|
Joy Mapping Stop = ""
|
|
# Joystick event string for switching between fullscreen/windowed modes
|
|
Joy Mapping Fullscreen = ""
|
|
# Joystick event string for saving the emulator state
|
|
Joy Mapping Save State = ""
|
|
# Joystick event string for loading the emulator state
|
|
Joy Mapping Load State = ""
|
|
# Joystick event string for advancing the save state slot
|
|
Joy Mapping Increment Slot = ""
|
|
# Joystick event string for resetting the emulator
|
|
Joy Mapping Reset = ""
|
|
# Joystick event string for slowing down the emulator
|
|
Joy Mapping Speed Down = ""
|
|
# Joystick event string for speeding up the emulator
|
|
Joy Mapping Speed Up = ""
|
|
# Joystick event string for taking a screenshot
|
|
Joy Mapping Screenshot = ""
|
|
# Joystick event string for pausing the emulator
|
|
Joy Mapping Pause = ""
|
|
# Joystick event string for muting/unmuting the sound
|
|
Joy Mapping Mute = ""
|
|
# Joystick event string for increasing the volume
|
|
Joy Mapping Increase Volume = ""
|
|
# Joystick event string for decreasing the volume
|
|
Joy Mapping Decrease Volume = ""
|
|
# Joystick event string for fast-forward
|
|
Joy Mapping Fast Forward = ""
|
|
# Joystick event string for advancing by one frame when paused
|
|
Joy Mapping Frame Advance = ""
|
|
# Joystick event string for pressing the game shark button
|
|
Joy Mapping Gameshark = ""
|
|
|
|
|
|
[Input-SDL-Control1]
|
|
|
|
# Mupen64Plus SDL Input Plugin config parameter version number. Please don't change this version number.
|
|
version = 2.000000
|
|
# Controller configuration mode: 0=Fully Manual, 1=Auto with named SDL Device, 2=Fully automatic
|
|
mode = 0
|
|
# Specifies which joystick is bound to this controller: -1=No joystick, 0 or more= SDL Joystick number
|
|
device = 0
|
|
# SDL joystick name (or Keyboard)
|
|
name = "Microsoft X-Box One S pad"
|
|
# Specifies whether this controller is 'plugged in' to the simulated N64
|
|
plugged = True
|
|
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 4=Transfer pak, 5=Rumble pak
|
|
plugin = 2
|
|
# If True, then mouse buttons may be used with this controller
|
|
mouse = False
|
|
# Scaling factor for mouse movements. For X, Y axes.
|
|
MouseSensitivity = "2.00,2.00"
|
|
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
|
|
AnalogDeadzone = "2000,2000"
|
|
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
|
|
AnalogPeak = "32767,32767"
|
|
# Digital button configuration mappings
|
|
DPad R = "hat(0 Right)"
|
|
DPad L = "hat(0 Left)"
|
|
DPad D = "hat(0 Down)"
|
|
DPad U = "hat(0 Up)"
|
|
Start = "button(7)"
|
|
Z Trig = "axis(2+)"
|
|
B Button = "button(2)"
|
|
A Button = "button(0)"
|
|
C Button R = "axis(3+)"
|
|
C Button L = "axis(3-)"
|
|
C Button D = "axis(4+)"
|
|
C Button U = "axis(4-)"
|
|
R Trig = "button(5)"
|
|
L Trig = "button(4)"
|
|
Mempak switch = "key(44)"
|
|
Rumblepak switch = "key(46)"
|
|
# Analog axis configuration mappings
|
|
X Axis = "axis(0-,0+)"
|
|
Y Axis = "axis(1-,1+)"
|
|
|
|
|
|
[Input-SDL-Control2]
|
|
|
|
# Mupen64Plus SDL Input Plugin config parameter version number. Please don't change this version number.
|
|
version = 2.000000
|
|
# Controller configuration mode: 0=Fully Manual, 1=Auto with named SDL Device, 2=Fully automatic
|
|
mode = 1
|
|
# Specifies which joystick is bound to this controller: -1=No joystick, 0 or more= SDL Joystick number
|
|
device = -1
|
|
# SDL joystick name (or Keyboard)
|
|
name = ""
|
|
# Specifies whether this controller is 'plugged in' to the simulated N64
|
|
plugged = False
|
|
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 4=Transfer pak, 5=Rumble pak
|
|
plugin = 2
|
|
# If True, then mouse buttons may be used with this controller
|
|
mouse = False
|
|
# Scaling factor for mouse movements. For X, Y axes.
|
|
MouseSensitivity = "2.00,2.00"
|
|
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
|
|
AnalogDeadzone = "4096,4096"
|
|
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
|
|
AnalogPeak = "32768,32768"
|
|
# Digital button configuration mappings
|
|
DPad R = ""
|
|
DPad L = ""
|
|
DPad D = ""
|
|
DPad U = ""
|
|
Start = ""
|
|
Z Trig = ""
|
|
B Button = ""
|
|
A Button = ""
|
|
C Button R = ""
|
|
C Button L = ""
|
|
C Button D = ""
|
|
C Button U = ""
|
|
R Trig = ""
|
|
L Trig = ""
|
|
Mempak switch = ""
|
|
Rumblepak switch = ""
|
|
# Analog axis configuration mappings
|
|
X Axis = ""
|
|
Y Axis = ""
|
|
|
|
|
|
[Input-SDL-Control3]
|
|
|
|
# Mupen64Plus SDL Input Plugin config parameter version number. Please don't change this version number.
|
|
version = 2.000000
|
|
# Controller configuration mode: 0=Fully Manual, 1=Auto with named SDL Device, 2=Fully automatic
|
|
mode = 1
|
|
# Specifies which joystick is bound to this controller: -1=No joystick, 0 or more= SDL Joystick number
|
|
device = -1
|
|
# SDL joystick name (or Keyboard)
|
|
name = ""
|
|
# Specifies whether this controller is 'plugged in' to the simulated N64
|
|
plugged = False
|
|
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 4=Transfer pak, 5=Rumble pak
|
|
plugin = 2
|
|
# If True, then mouse buttons may be used with this controller
|
|
mouse = False
|
|
# Scaling factor for mouse movements. For X, Y axes.
|
|
MouseSensitivity = "2.00,2.00"
|
|
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
|
|
AnalogDeadzone = "4096,4096"
|
|
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
|
|
AnalogPeak = "32768,32768"
|
|
# Digital button configuration mappings
|
|
DPad R = ""
|
|
DPad L = ""
|
|
DPad D = ""
|
|
DPad U = ""
|
|
Start = ""
|
|
Z Trig = ""
|
|
B Button = ""
|
|
A Button = ""
|
|
C Button R = ""
|
|
C Button L = ""
|
|
C Button D = ""
|
|
C Button U = ""
|
|
R Trig = ""
|
|
L Trig = ""
|
|
Mempak switch = ""
|
|
Rumblepak switch = ""
|
|
# Analog axis configuration mappings
|
|
X Axis = ""
|
|
Y Axis = ""
|
|
|
|
|
|
[Input-SDL-Control4]
|
|
|
|
# Mupen64Plus SDL Input Plugin config parameter version number. Please don't change this version number.
|
|
version = 2.000000
|
|
# Controller configuration mode: 0=Fully Manual, 1=Auto with named SDL Device, 2=Fully automatic
|
|
mode = 1
|
|
# Specifies which joystick is bound to this controller: -1=No joystick, 0 or more= SDL Joystick number
|
|
device = -1
|
|
# SDL joystick name (or Keyboard)
|
|
name = ""
|
|
# Specifies whether this controller is 'plugged in' to the simulated N64
|
|
plugged = False
|
|
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 4=Transfer pak, 5=Rumble pak
|
|
plugin = 2
|
|
# If True, then mouse buttons may be used with this controller
|
|
mouse = False
|
|
# Scaling factor for mouse movements. For X, Y axes.
|
|
MouseSensitivity = "2.00,2.00"
|
|
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
|
|
AnalogDeadzone = "4096,4096"
|
|
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
|
|
AnalogPeak = "32768,32768"
|
|
# Digital button configuration mappings
|
|
DPad R = ""
|
|
DPad L = ""
|
|
DPad D = ""
|
|
DPad U = ""
|
|
Start = ""
|
|
Z Trig = ""
|
|
B Button = ""
|
|
A Button = ""
|
|
C Button R = ""
|
|
C Button L = ""
|
|
C Button D = ""
|
|
C Button U = ""
|
|
R Trig = ""
|
|
L Trig = ""
|
|
Mempak switch = ""
|
|
Rumblepak switch = ""
|
|
# Analog axis configuration mappings
|
|
X Axis = ""
|
|
Y Axis = ""
|
|
|
|
|
|
[rsp-cxd4]
|
|
|
|
# Mupen64Plus cxd4 RSP Plugin config parameter version number
|
|
Version = 1.000000
|
|
# Send display lists to the graphics plugin
|
|
DisplayListToGraphicsPlugin = False
|
|
# Send audio lists to the audio plugin
|
|
AudioListToAudioPlugin = False
|
|
# Force CPU-RSP signals synchronization
|
|
WaitForCPUHost = False
|
|
# Support CPU-RSP semaphore lock
|
|
SupportCPUSemaphoreLock = False
|
|
|
|
|
|
[Rsp-HLE]
|
|
|
|
# Mupen64Plus RSP HLE Plugin config parameter version number
|
|
Version = 1.000000
|
|
# Path to a RSP plugin which will be used when encountering an unknown ucode.You can disable this by letting an empty string.
|
|
RspFallback = ""
|
|
# Send display lists to the graphics plugin
|
|
DisplayListToGraphicsPlugin = True
|
|
# Send audio lists to the audio plugin
|
|
AudioListToAudioPlugin = False
|
|
|
|
|
|
[Video-Angrylion-Plus]
|
|
|
|
# Distribute rendering between multiple processors if True
|
|
Parallel = True
|
|
# Rendering Workers (0=Use all logical processors)
|
|
NumWorkers = 0
|
|
# VI mode (0=Filtered, 1=Unfiltered, 2=Depth, 3=Coverage)
|
|
ViMode = 1
|
|
# Scaling interpolation type (0=NN, 1=Linear)
|
|
ViInterpolation = 0
|
|
# Use anamorphic 16:9 output mode if True
|
|
ViWidescreen = False
|
|
# Hide overscan area in filteded mode if True
|
|
ViHideOverscan = False
|
|
# Display overscan area in filteded mode if True
|
|
ViOverscan = False
|
|
# Compatibility mode (0=Fast 1=Moderate 2=Slow
|
|
DpCompat = 0
|
|
|
|
|
|
[Video-General]
|
|
|
|
# Use fullscreen mode if True, or windowed mode if False
|
|
Fullscreen = False
|
|
# Width of output window or fullscreen width
|
|
ScreenWidth = 1280
|
|
# Height of output window or fullscreen height
|
|
ScreenHeight = 960
|
|
# If true, activate the SDL_GL_SWAP_CONTROL attribute
|
|
VerticalSync = False
|
|
|
|
|
|
[Video-GLideN64]
|
|
|
|
# Settings version. Don't touch it.
|
|
configVersion = 26
|
|
# Enable/Disable MultiSampling (0=off, 2,4,8,16=quality)
|
|
MultiSampling = 0
|
|
# Enable/Disable Fast Approximate Anti-Aliasing FXAA
|
|
FXAA = 0
|
|
# Screen aspect ratio (0=stretch, 1=force 4:3, 2=force 16:9, 3=adjust)
|
|
AspectRatio = 1
|
|
# Swap frame buffers (0=On VI update call, 1=On VI origin change, 2=On buffer update)
|
|
BufferSwapMode = 0
|
|
# Frame buffer size is the factor of N64 native resolution.
|
|
UseNativeResolutionFactor = 1
|
|
# Bilinear filtering mode (0=N64 3point, 1=standard)
|
|
bilinearMode = 0
|
|
# Remove halos around filtered textures.
|
|
enableHalosRemoval = 0
|
|
# Max level of Anisotropic Filtering, 0 for off
|
|
MaxAnisotropy = 0
|
|
# Enable color noise emulation.
|
|
EnableNoise = 1
|
|
# Enable LOD emulation.
|
|
EnableLOD = 1
|
|
# Enable hardware per-pixel lighting.
|
|
EnableHWLighting = 1
|
|
# Use persistent storage for compiled shaders.
|
|
EnableShadersStorage = 0
|
|
# Do not use shaders to emulate N64 blending modes. Works faster on slow GPU. Can cause glitches.
|
|
EnableLegacyBlending = 0
|
|
# Enable writing of fragment depth. Some mobile GPUs do not support it, thus it made optional. Leave enabled.
|
|
EnableFragmentDepthWrite = 1
|
|
# Use GLideN64 per-game settings.
|
|
EnableCustomSettings = 0
|
|
# Make texrect coordinates continuous to avoid black lines between them. (0=Off, 1=Auto, 2=Force)
|
|
CorrectTexrectCoords = 1
|
|
# Render 2D texrects in native resolution to fix misalignment between parts of 2D image.
|
|
EnableNativeResTexrects = 1
|
|
# Render backgrounds mode (HLE only). (0=One piece (fast), 1=Stripped (precise))
|
|
BackgroundsMode = 1
|
|
# Enable frame and|or depth buffer emulation.
|
|
EnableFBEmulation = 1
|
|
# Copy auxiliary buffers to RDRAM
|
|
EnableCopyAuxiliaryToRDRAM = 0
|
|
# Enable N64 depth compare instead of OpenGL standard one. Experimental.
|
|
EnableN64DepthCompare = 0
|
|
# Force depth buffer clear. Hack. Needed for Eikou no Saint Andrews.
|
|
ForceDepthBufferClear = 0
|
|
# Disable buffers read/write with FBInfo. Use for games, which do not work with FBInfo.
|
|
DisableFBInfo = 1
|
|
# Read color buffer by 4kb chunks (strict follow to FBRead specification)
|
|
FBInfoReadColorChunk = 0
|
|
# Read depth buffer by 4kb chunks (strict follow to FBRead specification)
|
|
FBInfoReadDepthChunk = 1
|
|
# Enable color buffer copy to RDRAM (0=do not copy, 1=copy in sync mode, 2=Double Buffer, 3=Triple Buffer)
|
|
EnableCopyColorToRDRAM = 2
|
|
# Enable depth buffer copy to RDRAM (0=do not copy, 1=copy from video memory, 2=use software render)
|
|
EnableCopyDepthToRDRAM = 2
|
|
# Enable color buffer copy from RDRAM.
|
|
EnableCopyColorFromRDRAM = 0
|
|
# Enable resulted image crop by Overscan.
|
|
EnableOverscan = 0
|
|
# PAL mode. Left bound of Overscan
|
|
OverscanPalLeft = 0
|
|
# PAL mode. Right bound of Overscan
|
|
OverscanPalRight = 0
|
|
# PAL mode. Top bound of Overscan
|
|
OverscanPalTop = 0
|
|
# PAL mode. Bottom bound of Overscan
|
|
OverscanPalBottom = 0
|
|
# NTSC mode. Left bound of Overscan
|
|
OverscanNtscLeft = 0
|
|
# NTSC mode. Right bound of Overscan
|
|
OverscanNtscRight = 0
|
|
# NTSC mode. Top bound of Overscan
|
|
OverscanNtscTop = 0
|
|
# NTSC mode. Bottom bound of Overscan
|
|
OverscanNtscBottom = 0
|
|
# Texture filter (0=none, 1=Smooth filtering 1, 2=Smooth filtering 2, 3=Smooth filtering 3, 4=Smooth filtering 4, 5=Sharp filtering 1, 6=Sharp filtering 2)
|
|
txFilterMode = 0
|
|
# Texture Enhancement (0=none, 1=store as is, 2=X2, 3=X2SAI, 4=HQ2X, 5=HQ2XS, 6=LQ2X, 7=LQ2XS, 8=HQ4X, 9=2xBRZ, 10=3xBRZ, 11=4xBRZ, 12=5xBRZ), 13=6xBRZ
|
|
txEnhancementMode = 0
|
|
# Deposterize texture before enhancement.
|
|
txDeposterize = False
|
|
# Don't filter background textures.
|
|
txFilterIgnoreBG = True
|
|
# Size of filtered textures cache in megabytes.
|
|
txCacheSize = 100
|
|
# Use high-resolution texture packs if available.
|
|
txHiresEnable = False
|
|
# Allow to use alpha channel of high-res texture fully.
|
|
txHiresFullAlphaChannel = True
|
|
# Use alternative method of paletted textures CRC calculation.
|
|
txHresAltCRC = False
|
|
# Enable dump of loaded N64 textures.
|
|
txDump = False
|
|
# Zip textures cache.
|
|
txCacheCompression = False
|
|
# Force use 16bit texture formats for HD textures.
|
|
txForce16bpp = False
|
|
# Save texture cache to hard disk.
|
|
txSaveCache = False
|
|
# Path to folder with hi-res texture packs.
|
|
txPath = "/home/marrub/.local/share/mupen64plus/hires_texture"
|
|
# Path to folder where plugin saves texture cache files.
|
|
txCachePath = "/home/marrub/.cache/mupen64plus/cache"
|
|
# Path to folder where plugin saves dumped textures.
|
|
txDumpPath = "/home/marrub/.cache/mupen64plus/texture_dump"
|
|
# File name of True Type Font for text messages.
|
|
fontName = "FreeSans.ttf"
|
|
# Font size.
|
|
fontSize = 18
|
|
# Font color in RGB format.
|
|
fontColor = "B5E61D"
|
|
# Force gamma correction.
|
|
ForceGammaCorrection = False
|
|
# Gamma correction level.
|
|
GammaCorrectionLevel = 2.000000
|
|
# Show FPS counter.
|
|
ShowFPS = False
|
|
# Show VI/S counter.
|
|
ShowVIS = False
|
|
# Show percent counter.
|
|
ShowPercent = False
|
|
# Show internal resolution.
|
|
ShowInternalResolution = False
|
|
# Show rendering resolution.
|
|
ShowRenderingResolution = False
|
|
# Counters position (1=top left, 2=top center, 4=top right, 8=bottom left, 16=bottom center, 32=bottom right)
|
|
CountersPos = 8
|
|
|